Spray the material evenly on the ground to keep it moist. Thirty minutes later, we can push the ground repeatedly with long hair. The purpose is to make the material absorb better and pay attention to the medium hardness of the long hair brush. When the concrete sealant becomes thicker and thicker, water can be sprayed on the ground, combined with the long hair brush, so that the excess material completely penetrates into the ground. When the material becomes thicker again, the whole ground will be covered. The surface can be washed with water, while the brush can be pushed back and forth with long hair to make the sticky things float up and wash the surface after the ground is dry. 混凝土密封凝固剂施工后的地面表面不粘,如果表面粘着,说明地面不干净,需要再次冲洗干燥.没有干净的地面容易出现白斑,会严重影响地面的外观,所以冲洗和清洗是非常重要的步骤.
The surface of the ground after the construction of concrete sealant is not sticky. If the surface is sticky, it means that the ground is not clean and needs to be washed and dried again. Without clean ground, white spots easily appear, which will seriously affect the appearance of the ground, so washing and cleaning are very important steps.
施工环境温度应保持在1.7 - 57摄氏度范围内,过高或过低的温度会影响地板养护质量.混凝土密封固化剂地板的施工时间约为1 - 3小时,地面干燥后即可离开.
The construction environment temperature should be kept in the range of 1.7-57 degrees Celsius, too high or too low temperature will affect the quality of floor maintenance. The construction time of concrete sealant curing agent floor is about 1-3 hours, and the ground can leave after drying.
In order to make the floor as long as possible, the new concrete sealant floor needs to save water. It needs to save water for 7 days. The purpose is to help the ground lock water, accelerate the sealing floor, so that the ground has enough hardness and hardness, without cracks.本站网址：http://www.zhuaisuan.tw