Sealant-curing agent floors are mainly characterized by strengthening the density of concrete, maximizing the hardness and strength of the ground, so that the ground has super-high wear resistance, compressive resistance, but also because of its environmental protection and wear resistance is well loved by people, but some customers will appear soon after the use of whitening alkali phenomenon, then this "whitening" phenomenon. How did it happen? How to deal with the partial whitening of Henan's curing agent floor? 密封固化剂地坪局部泛白的两种主要原因：
There are two main reasons for local whitening of the sealing agent.
1. The material of curing agent is abundant, the deposit of curing agent on the concrete surface is not cleaned up in time, and the curing agent evaporates and crystallizes to form white crystals. This will lead to a general phenomenon of whitening.
This situation is usually avoided during construction. After spraying the curing agent material, the rich curing agent material is dragged to a higher level with a broom and the ground is dry. Clean the ground in time according to the manufacturer's requirement (wash the ground with water, clean the mud with water scraper or water suction machine; or clean the ground with brush, clean the mud with water scraper or water suction machine).
2. Acidic materials lead to the ground alkali phenomenon: here is the basic cement ground is alkaline, and acid cement sealant reaction more easily lead to this phenomenon.
Alkaline lithium-based Henan sealant is generally recommended to prevent ASR [Silicon Adverse Reaction] because lithium-based sealant has the characteristics of low viscosity and low alkalinity, reducing the reaction rate with calcium compounds in concrete, and penetrating deeper, more complete reaction, more uniform penetration of concrete surface, so that A SR adverse reactions ceased. Cicafu sealant curing agent with high lithium content, does not contain sodium salt, potassium salt, to avoid concrete surface cracking, flooding alkali phenomenon. The main advantages of Sikafo lithium-based sealant curing agent are: first, hardness; second, gloss; third, clarity; fourth, compactness, oil resistance; fifth, simplicity of construction.
In addition, in order to avoid the phenomenon of whitening of Henan seal curing agent, we should pay attention to the following matters:
1. Soak the material, do not put on the material, regardless, to add more water, sweep evenly, keep the ground moist.
2. After soaking time, if off-duty, to add more clean water, sweep evenly, with a vacuum cleaner to clean the material water.
3. If the appearance of whitening, you can use a washing machine with black cleaning sheet (black pad, washing sheet) and water wash to reduce the whitening scene, such as uneven ground, it is best to each type of grinding disc after drying sewage slurry, plus water washed with black pad, and then replace a type of grinding disc grinding.
4. Every type of grinding disc must be sucked clean sewage slurry, do not suck sewage slurry directly replaced by a grinding disc. Another thing to note is that after polishing, to timely clean up, do not wait until the ground is completely dry, and then vacuum to suck, so it is not clean.
如地面泥浆干了，有3种解决办法： A、加清水用洗地机洗 B、加清水再磨一次 C、加清水用扫把用力清扫
If the mud on the ground is dry, there are three solutions: A. Wash B by washing machine with clean water, grind C again with clean water, and sweep hard with a broom with clean water.本站网址：http://www.zhuaisuan.tw